HEATING INSTRUCTIONS

DTF is the process in which designs are printed directly onto a film. The design is able to be applied to almost any substrate/material and can go on any color item.

Every Heat Press is different, temps and pressure are not always accurate or even so adjusting for your individual press is necessary, we highly recommend a heat gun. WE ARE NOT RESPONSIBLE FOR ANY PRESSING ISSUES DUE TO INACCURATE TEMPERATURE OR PRESSURE.

Direct To Film Transfers

  • High Pressure (8-9 manual) 60PSI Automatic
  • Cold Peel
    • Poly Blend - Temp: 275, Time: 10 sec
    • Tri Blend - Temp: 275, Time: 10 sec
    • 50/50 - Temp: 300, Time: 12 sec
    • Cotton - Temp: 325, Time: 15 sec
  • Double Press With Parchment Paper For Best Results

 

We are not responsible for damaged transfers after you have pressed them. Please make sure you are knowledgable on your heat, pressing pressure and peeling technique. This includes using non-commercial grade heat presses or irons to try and use our transfers. 

 

We recommend using a heat gun to verify your heat temperature and the use a pressure test prior to pressing. 

Items should not be washed for at least 48 hours. Please allow the shirt to completely set with the item. You can view further care instructions for both transfers and pressed garments here.  

Due to the many variations in monitors and browsers, colors may appear different on different monitors. Computer monitors are not all calibrated equally and color reproduction on the Internet is not precise.